Your nearest location is:

CONTACT US

B40VAC – Landoll

Home / New Equipment / B40VAC – Landoll

The Bendi model B40VAC works in aisles as narrow as *72″ (1.8M), has a basic capacity of 4,000 lbs. (1814 kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). This high-performance VNA Model has fast travel speeds and can climb steep ramps.

The Bendi B40VAC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking, and power enable climbing steep ramps with loads. Three masts are available making this unit excellent for loading/unloading trailers and containers. The B40VAC can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40VAC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with front wheel hydraulic steering, the B40VAC provides exceptional control and makes load placement and retrieval superior to the competition.

Maximizes Material Handling Productivity

The versatile Bendi B40VAC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B40VAC has large diameter tires and has great under clearance for avoiding floor obstructions. One forklift can go from the truck to the rack eliminating staging and additional operators and support forklifts.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

Click here for more information.

  • 4,400 lb. (2,000kg) Capacity
  • Lift Heights to 417” (10.6M)
  • 72” (1.82M) Stacking Aisle
  • 8” (200mm) Sideshifter and 36” (914mm) High Load Backrest Standard
  • 32” (813mm) Wide Front Axle
  • Dual Inside / Outside Capability
  • AC Powered
  • Optional Cold Storage Conditioned to -22°F (-30°C)
  • Large Diameter Smooth Rubber Drive Tires
  • Polyurethane Load Tires
  • 220° Front-End Articulation / Steering
  • Heavy Duty Dual Rear Wheel Planetary Drives
  • Powerful Drive and Hydraulic Motors
  • Forward and Rearward Mast Tilt
  • Heavy Duty Chassis Design
  • 220° DuraSteer Articulated Steering System
  • Full Diagnostics Dash Display
  • Easily Accessible Components for Low Cost Maintenance
  • Hydraulic Power Steering
  • Comfortable Seated Operation with All Truck Controls in Easy Reach
  • 4-Post Heavy Duty Overhead Guard
  • Safety Deadman Seat Switch
  • Clearview 3-Stage Mast
  • Key Switch, Horn, Hour Meter, Adjustable Suspension Seat and Steering Column, Seat Belt and Armrest are Standard
  • AC Powered Dual Traction Motor Controller
  • AC Powered Hydraulic Pump Motor Controller
  • Battery Discharge Indicator with Lift Interrupt
  • Lighting and Alarm Accessories Available
  • Provisions for RF Terminals Provided
  • 4,000 lb. (1814kg) Capacity at 24″ (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive Provides Excellent Power, Braking, and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
  • Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System
  • Optional Cold Storage Conditioned to -22°F (-30°C)
Processing...
Thank you! Your subscription has been confirmed. You'll hear from us soon.
Enter your email address below to subscribe to our newsletter!
ErrorHere